TREMproof® PUMA Flashing System is a quick-cure, liquid-applied system based on PUMA technology. This system cures within 30 minutes, even in temperature below freezing, and has tenacious adhesion to concrete and metal. TREMproof PUMA Flashing System is composed of a primer (Tremco PUMA Primer) and a UV stable base coat (Tremco PUMA Flashing). A top coat (Tremco PUMA TC) can be used when needed for aesthetic reasons. All system components are cured using Tremco PUMA Initiator+.

Tremco PUMA Flashing is a polyurethane-methacrylate (PUMA) base coat. Tremco PUMA Flashing bonds firmly to Tremco PUMA Primer. It retains its integrity even if substrate movement causes hair-line cracks of up to 1/16" (1.5 mm). If cut or damaged, Tremco PUMA Flashing will prevent water migration between itself and the substrate.

Features

• PUMA technology delivers extreme durability while maintaining its crack-bridging characteristics, eliminating the need for
  reinforcing fabric.
• Rapid set-up times allow for quick overall installation, as well as the ability to open up to traffic one hour later.
• Can be applied at temperatures as low as 14 °F (-10 °C), which allows for continuation of projects in the colder months.
• Initiator adjustments allow for 30 to 45 min cure time between applications, even at temperatures below freezing.
• Extremely forgiving application allows users to apply additional coats long after the previous coat has cured.
• Unique chemistry allows for easy repair.
• Compatible with Tremco sealants, coatings and expansion joints, which is essential for tie-ins, detailing and penetrations.